Page 1 of 1
quest 31 schematic drawings? mfr rigging specs
Posted: Sun Feb 01, 2015 7:23 pm
by jvolpehoo
does anyone have manufacturer specs for the quest 31 or construction drawings? If not, how do you tune your rigging? I acquired a '78 last year and want to open and inspect the water tight compartments as well as plan for running power to the bow - schematic drawings would be really helpful. thanks
Re: quest 31 schematic drawings? mfr rigging specs
Posted: Wed Feb 25, 2015 9:06 pm
by Paulfrench
Hi I've got an 84 quest, owned since 1986, just totally refitted mine, i also put a new installed a new rig with an extra metre on mast height, I can help you with tuning....I don't have maunfucters specs but I'm sure I can help, let me know?..
Re: quest 31 schematic drawings? mfr rigging specs
Posted: Mon Mar 09, 2015 12:56 am
by classicone
I also have a Quest 31 and can try to help. I don't have factory plans but have intimate knowledge of my Quest.
Re: quest 31 schematic drawings? mfr rigging specs
Posted: Tue Apr 14, 2015 1:33 pm
by jvolpehoo
Paulfrench wrote:Hi I've got an 84 quest, owned since 1986, just totally refitted mine, i also put a new installed a new rig with an extra metre on mast height, I can help you with tuning....I don't have maunfucters specs but I'm sure I can help, let me know?..
I bought a '78 quest with twin headstays. My rigger wants to go to a single in order to mount a furler. does anyone have orginal specs for the single headstay?
Re: quest 31 schematic drawings? mfr rigging specs
Posted: Tue Apr 14, 2015 1:34 pm
by jvolpehoo
classicone wrote:I also have a Quest 31 and can try to help. I don't have factory plans but have intimate knowledge of my Quest.
I bought a '78 quest with twin headstays. My rigger wants to go to a single in order to mount a furler. does anyone have orginal specs for the single headstay?
Re: quest 31 schematic drawings? mfr rigging specs
Posted: Sun Apr 26, 2015 2:17 am
by classicone
Just measured my roller furling headstay. It is 7mm, all of the rest of the standing rigging is 6mm. My Quest is hull 65 and came from factory with sss spar....which from everything I can gather, is no longer in business. My mid mast aft swept stays are anchored inboard next to my aft facing ports. I have seen numerous Quest 31 with these stay anchored on outboard cabin sides. Hope this helps.
Terry